F. No. HQ-16031/1/2021-EU-I-HQUnique Identification Authority of India (UIDAI)(Enrolment and Update I-Division)
Office Memorandum
Subject: Revised specifications of Aadhaar Enrolment Kit (AEK) - reg.
In order to cop-up with the technological advancements at hardware and software level and UIDAI's security policies, competent authority approved the revised specifications of Aadhaar Enrolment Kit (AEK) functioning under Enrolment Client Multiple Platform (ECMP), Update Client Lite (UCL) and Universal Client (UC).
2. All the components/devices as mentioned in the revised specification given at Annex shall constitute the AEK for ECMP and UC. However, Slap scanner and Dual Iris scanner does not form a part of the AEK for UCL.
4. System Integrators (SIs) and vendors are required to get the Kit tested at UIDAI Regional Offices/Tech Centre for interoperability with the latest UIDAI's enrolment application as per the existing process.
5. Regional Offices shall inform the Registrars to procure devices as per the latest specifications. Registrars can procure devices with higher/upgraded specification based on the local requirement and availability through GeM portal.
6. The enclosed specifications supersede the existing AEK specifications issued vide Circular No. 4(4)/57/122/2012/UIDAI/Pt dated 31.12.2018.
7. This is issued with the approval of competent authority.
# Aadhaar Enrolment Kit
Aadhaar enrolment kit consists of a set of hardware devices required to carry out successful Aadhaar enrolments & update. This set of devices comprises of following devices.
I. Laptop/Desktop
II. Monitor
III. Multifunction Device
IV. White screen
V. Focus Light
VI. Surge Protector spike
VII. Iris Scanner
VIII. Camera
IX. Slap scanner
X. Global Navigation Satellite System (GNSS) Device
XI. Single Finger Print RD L1 device
XII. Single Iris Scanner RD device
1. All these devices shall be as per UIDAI's specifications.
2. Biometric devices (Slap/Iris Scanner/Single Iris Scanner/Camera) L0 RD device and Single Finger Print RD L1 device shall be STQC certified.
3. Complete kit warranty shall be for 3 years except White screen, Focus light & surge protector.
4. During warranty, faulty equipment's shall be replaced/repaired within 7 days.
5. Aadhaar Enrolment Kit comprising of specific make/model of device shall be UIDAI certified for its working with latest UIDAI's enrolment client (ECMP)
6. AEK vendors to provide Manufacturers Authorization Form (MAF) issued by OEM for warranty support.
7. It is the responsibility of the AEK vendor/OEM to provide Standard drivers, java and .net supporting SDK, digitally signed VDM with source code based on the publicly available drivers & SDK versions and on demand support for the devices which are part of the AEK.
8. OEMs to support UIDAI for Forensic analysis in case of any requirement or need arises
Page 1 of 12
Item S.1.1. - Laptop
| Specification | Details |
|---|---|
| Machine Form Factor | Laptop |
| CPU | 4 Core processor or higher with minimum Frequency 4.0 GHz or higher and 10 MB Cache or higher |
| Display | Minimum 14" HD Anti-Glare (16:9) |
| Display type | LED |
| Connectivity | Wi-Fi (IEEE 802.11b/g/n/ac) and Ethernet (10/1000 Base-T) |
| MEMORY | Min. 16-GB DDR4RAM or higher expandable up to 32-GB or higher with 1 DIMM SLOT FREE |
| Solid-State Drive (SSD) | Minimum 512GB SSD |
| Input/output Ports | One HDMI – minimum Two(VGA/ DP Port/Type C/HDMI) port with Display Transfer feature Dedicated Minimum 3 USB 2.0 port* One Ethernet (RJ-45) |
| Battery Backup | 6hrs backup time in case of laptop |
| Chipset | System-on-a-Chip |
| Graphics | Integrated Graphics |
| Keyboard | Integrated for laptop sized (Minimum 84 Keys) Windows compatible Spill-resistant keyword |
| Touchpad | Wide Touchpad below keyboard for laptop |
| Preloaded OS | Windows 11 professional or higher (Standard and Home edition of windows are not allowed) |
| Certification | BIS,or any other relevant Indian Certificates |
| ACCESSORIES | USB Hub with multiple USB connections (enabling 5 devices plug-in through USB port), Laptop carrying case |
| WARRANTY | 3 years comprehensive onsite-warranty including Battery and power adapter |
| ANTI-VIRUS | Reputed Antivirus/EDR software with regular signature updates |
| TPM | System should support Trusted Platform Module (TPM) version 2.0 or higher version |
Item S.1.1.1 – Desktop
| Specification | Details |
|---|---|
| Machine Form Factor | Desktop(Small form Factor) |
| CPU | 4 Core processor or higher with minimum Frequency 4.0 Ghz or higher and 10 MB Cache or higher |
| MEMORY | Min. 16-GB DDR4RAM or higher expandable up to 32-GB or higher with 1 DIMM SLOT FREE |
| Connectivity | Ethernet (10/1000 Base-T) |
| Solid-State Drive (SSD) | Minimum 512GB SSD |
| Input/output Ports | Min 1 HDMI One (VGA/ DP Port/Type C ) port with Display Transfer feature supported by Monitor Dedicated Minimum 5 USB 2.0 port One Ethernet (RJ-45) |
| Battery Backup | 0.5KVA UPS with 30 min backup time For desktop |
| Chipset | Integrated with CPU or equivalent |
| Graphics | Integrated Graphics |
| Keyboard | (Minimum 104 Keys) Windows compatible Spill-resistant keyword |
| Touchpad | Optical USB mouse |
| Preloaded OS | Windows 11 professional or higher (Standard and Home edition of windows are not allowed) |
| Certification | BIS, or any other relevant Indian Certificates |
| WARRANTY | 3 years comprehensive onsite-warranty |
| ANTI-VIRUS | Reputed Antivirus/EDR software with regular signature updates(Licensed version required) |
| TPM | System should support Trusted Platform Module (TPM) version 2.0or higher version |
Item S.1.2. - Monitor
| Specification | Details |
|---|---|
| Size | 15-16 inch or higher |
| Type | LED |
| Resolution | 1024 x 768 or above |
Note: One additional Monitor with Desktop & Laptop - One for Operator view and other for applicant of enrolment and update view
Item S.1.3. – Multi Functional Device (MFD)
| Specification | Details |
|---|---|
| Function | PRINTCOPY SCAN (COLOR) |
| DUTY CYCLE IN PAGES | 3000 PAGES per month |
| Print Speed PPM – BLACK(A4) | 18 PPM or better |
| Resolution | 600 X 600 DPI |
| Printing Technology | Ink Tank /laser |
| Custom media size | A4 |
| Standard operating system supported | Compatible with Windows 11 professional or higher |
| Scan resolution | 600 X 600 DPI OPTICAL |
| Bit/color depth | 24 BITS |
| Copy speed | 18 CPM or better |
| Copy resolution | 600 X 600 DPI |
| Scan file format | Minimum PDF, JPEG |
| BIS Registration under CRS of MeitY | Yes |
| Onsite OEM Warranty | Minimum 3 years |
Item S.1.4. – White Screen
| Specification | Details |
|---|---|
| Size | 4 X 5 ft Stand mountable / wall mountable |
| Accessories | Stand |
| Non-Reflecting | Yes |
| Opaque | Yes |
Item S.1.5. – Focus Light
| Specification | Details |
|---|---|
| Type | LED, minimum 5 W |
| Accessories | Stand, 2Mrts Wire and on/off Switch near the operator |
Item S.1.6. – Surge Protector Spike
| Specification | Details |
|---|---|
| General | 6 nos. of 5A sockets (4 Indian style + 2 International Style), Fuse, on/off Switch and ISO mark |
Item S.2.1 – Iris Device Specification
| Specification | Stationary (mounted: wall, tripod or stand)¹ | Hand_held² | Hand-held with alignment aid³ |
|---|---|---|---|
| Standard compliance for image capture | ISO/IEC 19497-6 (2005 or preferable2011 version) | ||
| Iris Diameter (In pixel) | >190 | ||
| Spatial Resolution Pixel Resolution | >60% @ 4.0 Lp/mm >=18 Pixels/mm | ||
| # of simultaneous captured eyes⁴ | 2 | ||
| Viewfinder | External | Internal | External or Internal |
| Capture distance | >750 mm | >50mm | >20 mm |
| Capture volume (width/height/depth) | >250x500x500mm | >20x15x12mm | >20x15x12mm |
| Exposure time | <15ms td=""> | <33ms td=""> | <33ms td=""> |
| Imaging wavelength | 700-900 nm | ||
| Spectral Spread | Power in any 100nm band >35% of total power | ||
| Scan type | Progressive | ||
| Image margins | Left & right: 0.50x iris diameter, Top & bottom: 0.25x iris diameter | ||
| Pixel depth | >8 bits/pixel | ||
| Image evaluation frame rate | >=7 frames/sec, continuous image capture | ||
| Capture mode | Auto capture with built-in quality check (incorporates NIST quality considerations) | ||
| Sensor signal to noise ration | >40 DB | ||
| Connectivity⁵ | USB 2 or higher, USB-IF certified or Networked (TCP/IP) | USB 2 or higher, USB-IF certified | |
| Power | USB or independent PS | ||
| Weight | NA | < 1 kg | < 1 kg |
| Dimension | <300 100="" 300mm="" td="" x=""> | < 220 x 200 x 100 mm | < 220 x 200 x 100 mm |
| Operating temperature | 0-49C | ||
| Humidity | 10 - 90% non-condensing | ||
| Durability/Shock | IP54 | ||
| Safety Standard | Exempt Group per IEC 62471:2006-07 | ||
| Standards | FCC Class A, RoHS | ||
| Liveness | Liveness detection compliance as per IEEE Std 2790™-2020 & ISO/IEC 30107-3 | ||
| Software AP | Compliant with latest UIDAI Device Capture API Specifications. Windows 11 Professional VDM ready certified by UIDAI | ||
Footnotes:
¹Stationary: Any capture process where the device is stationary and the subject is required to position and rest himself/herself
²Handheld: Operator operates and holds the camera and the subject is stationary.
³Alignment aid: Camera has mechanical fixture for alignment. Optical viewfinder is not considered alignment aid.
⁴Considered simultaneous if second eye is captured within 2 seconds of first eye done without moving the device.
⁵Total of only 1 USB port will be available for connectivity and power
[Security – Digital Signature(Preferably at firmware level)]
Item S.2.2 – Camera
| Specification | Details |
|---|---|
| Standard compliance for image capture | ISO/IEC 19794-5 |
| Capture Mode | Plain live capture |
| Image Quality | Full Frontal (0x01) as per ISO/IEC 19794-5 |
| Minimum Resolution | 1920x1080 |
| Capture Mode | Manual Capture with Auto Focus and Auto Lighting Adjustment |
| Sensor | >2 Mega Pixel Native |
| Connectivity6 | High Speed USB 2.0 or higher, USB-IF certified |
| Lens | Fixed, SLR |
| Power | Through USB/Independent PS/Lithium Ion |
| Mount | Tripod/Universal Clip |
| Operating Temperature | 0 to 50 degree Celsius |
| Humidity | 10 – 90% |
| Safety Standard | UL, IS 616:2017 |
| Software API | Compliant with latest UIDAI Device Capture API Specifications |
| Durability / Shock | IP 54 |
*Total of only 1 USB port will be available for connectivity and power
Security – Digital Signature(Preferably at firmware level)
Item S.2.3 – Finger Print Device Specification (Slap Scanner)
| Specification | Details |
|---|---|
| Standard compliance for image capture | ISO/IEC 19794-4 |
| Capture Mode | Plain live scan capture |
| Image Acquisition Requirements | Setting level 31 or higher (Section 9.1 of Biometric Design Standards for UID Applications V1.0 |
| Image evaluation frame rate | > 3 frames/sec, continuous image capture |
| Capture mode | Auto capture with built-in quality check (incorporates NIST quality considerations) |
| Capture area | >76mm x 80mm |
Capture sizes
| Finger prints | Preferred width | Preferred height | ||
|---|---|---|---|---|
| Roll finger | 1.6 | 40.6 | 1.5 | 38.1 |
| Plain Thumb | 1 | 25.4 | 2 | 50.8 |
| Plain 4 fingers (Sequence check) | 3.2 | 81.3 | 3 | 76.2 |
| Plain 4 fingers (Identification flat) | 3.2 | 81.3 | 3 | 76.2 |
| Pixel depth | 1 to 16 bits (size 1 byte) |
| Image resolution (horiz) and (vert) | <=scan resolution (horiz) --2 bytes size and <=scan resolution (vert) --2 bytes size |
| Resolution of final output image | 500 ppi, plus or minus 5 ppi |
| Signal - to - noise ratio | Both the ratio of signal to white noise standard deviation and the ratio of signal to black noise standard deviation of the digital scanner >= 125 |
| Connectivity\(^7\) | USB 2.0 or higher, USB-IF certified |
| Power | Through USB |
| Dimension (W X H X D) | <180mm 180mm="" td="" x=""> |
| Weight | Maximum 2.5Kg |
| Operating temperature | 0 – 50 C |
| Humidity | 10 – 90% non-condensing |
| Durability / Shock | IP 54 |
| Standards | UL certified (if applicable). Meets ISO 19794-4:2005 Section7 and Annex A certification requirements (IAFIS Appendix F certified). |
| Software API | Compliant with latest UIDAI Device Capture API Specifications Linux/Windows 64 bit VDM ready certified by UIDAI |
| Platen Area Hardness | Hardness Test: 6H compliant Tested as per ASTM D3363; RCA Test: 175g, 400 cycles Abrasion test compliant as per ASTM F 2357-04 |
| Liveness | Liveness detection compliance as per IEEE Std 2790™-2020 & ISO/IEC 30107-3 |
Note:
7Total of only 1 USB port will be available for connectivity and power
Security – Digital Signature(Preferably at firmware level)
Item S.2.4 – GNSS Device
| Specification | Details |
|---|---|
| Environmental Specifications | |
| Operating temperature | -10 ~ 85°C |
| Storage temperature | -40 ~ 85°C |
| Humidity | 5% toUp to 95% non-condensing |
| Water proof | IP54 or higher |
| GNSS+NavIC Specification | |
| GNSS Chipset | SIRF Star III/SIRF Star IV GSDAe /Mediatek/u-blox/sky traq *Must support NavIC with other constellation |
| Frequency | L1&L5 Dual band |
| Position Accuracy | <5m 3drms="" td=""> |
| Time Accuracy | 15 ns |
| Channels | >=34 channel + GAGAN SBAS(Preferable) |
| Acquisition Sensitivity (in – dBm) | -142dBm or better |
| Tracking Sensitivity (in –dBm) | -156dBM or better |
| Protocol/Standard support | NMEA 0183 V3.0or latest protocol@ 115200/9600 baud rate, and supports messages: GGA, GSA, GSV, RMC, VTG, GLL,ZDA v2.2 |
| Position fix time | |
| Hot Start | 1-2 sec |
| Warm Start | < 30 sec |
| Cold Start | < 60 sec |
| Position Update Rate | >= 1Hz |
| Electrical characteristics | |
| Voltage | 3.5V ~ 6.5V |
| Current draw | 55-80mA |
| Other Parameters | |
| Type of connection and Range | Location and Time/NMEA data transmission to be Wireless with min. 50 m range For Wired min.20 m range |
| Ensuring Coordinate Accuracy | The coordinate must be captured with over 99% accuracy |
| Accessories | With all necessary required cables and accessories to connect to the PC/Laptop |
| Warranty | 3 years Comprehensive on-site Warranty |
Note:
1.* GNSS receiver should be capable of computing location from NavIC constellation
2. Total of only 1 USB port shall be available for connectivity and power
Item S.2.5 – Single Finger Print Scanner L1 Registered Device (RD)
| S. No. | Name/Description | Specifications | Properties |
|---|---|---|---|
| 1 | Single Finger Print Scanner Registered Device (L1 Compliant) | Yes | Mandatory |
| 2 | Single Finger Print Scanner Registered Device for Aadhaar Authentication with STQC UIDAI certified RD Service to the L1 compliant Fingerprint Registered Device | Yes | Mandatory |
| 3 | STQC Certified (STQC Certificate for the Registered L1 device must be submitted) | Yes | Mandatory |
| 4 | STQC Certificate Number & its validity(L1 compliant) | Yes | Mandatory |
| 5 | Connector Cable to connect the Device to Micro USB/Type C Port | Yes | Mandatory |
| 6 | Finger Print Device Connectivity | Through Integrated USB 2.0 or higher | Mandatory |
| 7 | Finger Print Device Power | Through USB | Mandatory |
| 8 | Sample application for Android platform to test sensor/extractor | Yes | Mandatory |
Note: (Refer approved Single Finger Print Scanner Registered Device devices on UIDAI website)
Item S.2.6 – Single Iris Scanner Registered Device (RD)
Note: (Refer approved Single Iris Scanner Registered Device devices on UIDAI website)
SPECIAL TERMS AND & CONDITIONS FOR AADHAAR ENROLMENT KIT
- Installation & commissioning: Bidder shall provide Remote support Facility for installation of Aadhaar Enrolment Kit
- Delivery Period: - Bidder shall complete the entire delivery to consignee within 30 days from date of purchase order.
- Performance bank guarantee – Bidder shall submit the PBG of 10% of the contract value to the purchaser before payment is released
- Payments: 100 percent of the payment shall be made within 10 days of supply of Aadhaar enrolment kit to consignee after its acceptance & submission of PBG.
- SLA: Incase failing to replace/repair of faulty equipment's within 7 days (equipment's within warranty), Rs100 penalty per day per equipment till the replacement/repair shall be deducted from PBG.
Updates:
Follow us on WhatsApp, Telegram Channel, Twitter and Facebook for all latest updates
Post a Comment